KCC's Quizzes AQQ305 about a mutual exponentiation equation
1. Quote of the month: "A train station is where a train stops. A bus station is where a bus stops. I have a work station on my desk, so..." - unknown
2. Quiz AQQ305 about finding a mutual exponential equation
Good luck, and try to be among the
View All
September Monthly Blog Quiz! Read the blog, take the quiz, and you could win a gift card
Quiz: How Well Do You Know Adaptive Power Switching?
Is your I/O module overheating? The AD74416H's Adaptive Power Switching (APS) can cut heat dissipation by up to 40% — but how well do you really understand how it works?
Read the blog first: Cooling
View All
ADV7180
Not Recommended for New Designs
The ADV7180 automatically detects and converts standard analog baseband television signals compatible with worldwide NTSC, PAL, and SECAM standards into...
Datasheet
ADV7180 on Analog.com
LT6550
Production
The LT6550/LT6551 are 3.3V triple and quad high speed video amplifiers. These voltage feedback amplifiers drive double terminated 50Ω or 75Ω cables and...
Datasheet
LT6550 on Analog.com
Hi,
I see that the ADV7180 have a autodetect sync signal. I have a RGB SOG (sync on green) video signal that I convert into YPbPr using the LT6550 amp (RGB is not supported by ADV7180).
My question is: After the conversion from RGB SOG to YPbPr the sync signal is on Y? the device ADV7180 is able to detect it?
regards,
Dario
As long as the resulting YPbPr has the correct sync timing pulse widths you should be OK.
ok thanks, I think that the problem is that if I have the sync only on Green and I convert into YPbPr the sync signal is not as low as if the sync is in all the component (RGB). do you know the low minimum limit for the device to detect the sync?
many thanks,
Dario
