ADV7513 HDCP

Hi ,

Can we disable the HDCP and use ADV7513 . from the register setting find that it is possible .

Do you have plans to roll out a Non HDCP version of ADV7513

Thanking you

With best regards and wishes

Parents
  • Hi GuenterL,

    Thanks for your answer.  However, the case I met may not as you said.  0xAF bits 7,4 will be changed by the controller

    on my board.  For the bit 1, it may not.  I didn't see.  But, each time, I set the bit 1, it would response late.  I normally

    have to set several times.  Is it correct?  I doubt something wrong on my board.  If you are right, I think we need to

    check the board.  Many thanks.

    Regards,

    Peter

Reply
  • Hi GuenterL,

    Thanks for your answer.  However, the case I met may not as you said.  0xAF bits 7,4 will be changed by the controller

    on my board.  For the bit 1, it may not.  I didn't see.  But, each time, I set the bit 1, it would response late.  I normally

    have to set several times.  Is it correct?  I doubt something wrong on my board.  If you are right, I think we need to

    check the board.  Many thanks.

    Regards,

    Peter

Children
No Data