Post Go back to editing

ADV7623 HDMI Equalizer Modes/Setup

Thread Summary

The user inquired about the configuration of the HDMI equalizer modes and the meaning of EQ_DYN1_LF and EQ_DYN1_HF parameters. Static mode requires no configuration, while dynamic mode allows settings based on defined frequency bands. EQ_DYN1_LF and EQ_DYN1_HF represent dB values. Gain settings are global and cannot be changed per channel. When dynamic equalizer is disabled, each HDMI port has independent EQ control (ADV7623).
AI Generated Content

1) The datasheet specifies that the HDMI equalizer can be set for 'dynamic' or ' static' mode.  Which mode is configurable, and which mode requires no configuration?  (i.e. is EQ_DYN_EN = 0 'static' the mode which is configurable)?

2) What do the EQ_DYN1_LF and EQ_DYN1_HF represent?  dB?  MHz?

3) Is it possible to change the gain on a particular channel?  How would that be accomplished?

thanks,

Jeremy

Parents
  • Hi Jeremy,

    1) Static mode requires no configuration and is the recommended mode.  Dynamic modes lets you apply settings that change based on 3 frequency bands you define with the EQ_DYN_FREQX registers.

    2) I believe it's DB. I'll check because it's probably not directly a number but rather index into a range of values.

    3) No, EQ settings are global.

    Dave

Reply
  • Hi Jeremy,

    1) Static mode requires no configuration and is the recommended mode.  Dynamic modes lets you apply settings that change based on 3 frequency bands you define with the EQ_DYN_FREQX registers.

    2) I believe it's DB. I'll check because it's probably not directly a number but rather index into a range of values.

    3) No, EQ settings are global.

    Dave

Children
No Data

Before You Switch


Switching languages will make ADI Explorer unavailable. Resume your session by switching back to English and reopening ADI Explorer.