Products Mentioned

AD723 Production
The AD723 is a low cost RGB-to-NTSC/PAL encoder that converts analog red, green, and blue color component signals into their corresponding luminance and...
Datasheet
AD723 on Analog.com

Thread Details

  • State Verified Answer
  • Replies 16 replies
  • Subscribers 78 subscribers
  • Views 2771 views
  • Users 0 members are here
Related Content

        

            Post
             Go back to editing
        

    

    


    

    









		


















	
	
			
	
			
			
	
	
		

	    
	    
	    		
The color burst from AD723 seems to move on AD723 Eval Board.

		
	
				

			

									
					    Tamu
					
							

            
            			
				
									
											
			
			
				
			
			
			    	
			                    
                
				                on May 28, 2013 
				
			
			
		

		
		                    	    

        	    
Thread Summary

                The user inquired about the variability of the color burst start point on the AD723 Eval Board (AD723EB rev.B). The engineer confirmed that the maximum phase error due to asynchronous operation is one cycle of 4FSC (90 degrees at 3.579545 MHz), and variations due to temperature, process, and voltage are negligible. The user should focus on the accuracy of the external 4FSC oscillator (14.318180 MHz) for assessing the burst start point variation.
                        	    

                
                     AI Generated Content
                
    	    

             
				
        		

		    
		    		    
		    			

			    
Hello,

 
I have questions about AD723.
The start point of color burst from AD723 seems to move on AD723 Eval Board (AD723EB rev.B).
Could you see attached file "Color_burst_AD723_rev01.xlsx" for more detail?

 
Thank you!

 
Best regards.
Tamu

			

			
									
		                             
                        

    

                                            
                 Video Products
                
                                                    
                 ad723eb
                
                                                    
                 Video Encoders
                
                                                    
                 burst
                
                                                    
                 ad723
                
                                        
                                            
                
                
                                        
                                            
                
                
                                        
                                            
                
                
                                
                    Show More
            

    
    
		


				
							Color_burst_AD723_rev01.xlsx
					        
        		

			
						
									
												
			
			
                        
                                    
                        
                        
                        
            
			            
						
						
			
			
			
			
		


        
        
        
    
					

			





















	

	

					



			








	
	
	
	



Parents
	
    
	

  • 
	
    



	
		
	
	



    
	
    
		
    
							
					
    
		
    
		    
		    		    
			
				
									
							        
			
			
			
            
						
                            
            
            				
            
                on May 31, 2013 2:29 AM
            
            
						
			            		
    
		
										0
					
	
    

		
		
    
		
    
                                
                                                            
    
					
    Hello Jonathan,
    
 
    Thank you very much for your reply.
    
 
    This is last question for this issue.
    
 
    >so the greatest phase error would be one cycle of 4FSC, or 90 degrees at 3.579545 MHz.
    
 
    I think this is the greatest phase error Even if it is a case where temperature and process change.
    
 
    Is this right?
    
 
    Thank you!
    
 
    Best regards.
    
 
    Tamu
    
			
    

		
			
	      

		
		
	
    
	
    
		
    
			
		
    
	
    
	
    
		
						
						
				
						
				
				
		
		
    
			
		
    
	
    

    

    • 

	




Reply

    


  • 
	
    



	
		
	
	



    
	
    
		
    
							
					
    
		
    
		    
		    		    
			
				
									
							        
			
			
			
            
						
                            
            
            				
            
                on May 31, 2013 2:29 AM
            
            
						
			            		
    
		
										0
					
	
    

		
		
    
		
    
                                
                                                            
    
					
    Hello Jonathan,
    
 
    Thank you very much for your reply.
    
 
    This is last question for this issue.
    
 
    >so the greatest phase error would be one cycle of 4FSC, or 90 degrees at 3.579545 MHz.
    
 
    I think this is the greatest phase error Even if it is a case where temperature and process change.
    
 
    Is this right?
    
 
    Thank you!
    
 
    Best regards.
    
 
    Tamu
    
			
    

		
			
	      

		
		
	
    
	
    
		
    
			
		
    
	
    
	
    
		
						
						
				
						
				
				
		
		
    
			
		
    
	
    

    

    • 





Children
	
No Data


		
			








		

		

			
    
				
  • 
					
												
						
						
						
						
						
						
						

																										
						
						

					
					
					
				
    • 
			

		

	








































     



















		        
        

            
Before You Switch

            
        

        

        

            Switching languages will make ADI Explorer unavailable. Resume your session by switching back to English and reopening ADI Explorer.