I have questions about the register settings of ADV7511 and ADV7511W.
Are there any differences of register settings we should set between ADV7511 and ADV7511W?
I think that "ADV7611 evaluation board software release 1.56.0 ALPHA" includes source code for ADV7511 (not for ADV7511W).https://sdk.analog.com/dw/sdks.aspx?file=ADVSW15Can we use these source code for ADV7511W without changing any register settings?
Background:My customer has been developing HDMI repeater system using ADV7611 and ADV7511W.They use your "ADV7611 evaluation board software release 1.56.0 ALPHA" module.So we'd like to know whether he can use it for ADV7511W without changing any register settings or not.
Thank you!Best regards.Tamu
The ADV7511 and ADV7511W are the same die. The basic differences are:
If the customer does not need deep color than the ADV7511W will work.
Thank you for your reply.
On "ADV7511_Programming_Guide.pdf", there are descriptions of deep color, which are "4.3.6 Deep Color Conversion" and "Table 31 Deep Color Conversion Related Registers (Main Map)"On "ADV7511W_Programming_Guide.pdf", there is no description about deep color.
So when the customer uses the source code of "ADV7611 evaluation board software release 1.56.0 ALPHA" for ADV7511W,I think he should take care that he doesn't use the registers of "Table 31 Deep Color Conversion Related Registers (Main Map)" on "ADV7511_Programming_Guide.pdf".
Is this right?Also, are there any other registers we should take care when "ADV7611 evaluation board software release 1.56.0 ALPHA" is used for ADV7511W?
I have an additional question.
There is a following setting on line 25 of the "7511_hal.c". 0x49, 0xA8,
About this "0x49" register, there is a description "Must be default for proper operation" on "ADV7511W_Programming_Guide.pdf".On "ADV7511_Programming_Guide.pdf", this "0x49" register indicates "Bit Trimming Mode".
Is this setting "0x49, 0xA8" is required for ADV7511W?Or we don't have to set it?
Could you answer my questions on my two comments above?If you have some questions, please let me know.
You said ADV7511W does not support deep color.So when the customer uses the source code of "ADV7611 evaluation board software release 1.56.0 ALPHA" for ADV7511W,I think he should not use the registers and API related to deep color. (For example, "ADIAPI_TxSetOutputColorDepth" etc.)Is this right?Is there any other items which we should take care?
My customer wants your answer. Please help us.
Yes,ADV7511 support deep color but ADv7511W doesn't. So you can remove that API. And also ADV7511W has lesser audio functionality and only 24 bit video input bus, Where ADV7511 has full HDMI1.4 audio and 36 bit video input bus.Please refer here ez.analog.com/.../difference-between-adv7511-and-adv7511w