KCC's Quizzes AQQ305 about a mutual exponentiation equation
1. Quote of the month: "A train station is where a train stops. A bus station is where a bus stops. I have a work station on my desk, so..." - unknown
2. Quiz AQQ305 about finding a mutual exponential equation
Good luck, and try to be among the
View All
September Monthly Blog Quiz! Read the blog, take the quiz, and you could win a gift card
Quiz: How Well Do You Know Adaptive Power Switching?
Is your I/O module overheating? The AD74416H's Adaptive Power Switching (APS) can cut heat dissipation by up to 40% — but how well do you really understand how it works?
Read the blog first: Cooling
View All
ADV7611
Recommended for New Designs
The ADV7611 is offered in automotive, professional (no HDCP), and industrial versions. The operating temperature range is −40°C to +85°C.
The UG-180...
Datasheet
ADV7611 on Analog.com
hi ADI team：
I have one question about the adv7611 output mdoe issue. i have a design for hdmi convert to SDI output(ADV7611+GS2972),
But the GS2972 just accept 20bit or 10bit data input, Form the adv7611 datasheet, we can just see that the adv7611 output mode support SDR4:2:2(8bit/12bit/16bit/24bit) and SDR4:4:4(24bit);
or DDR4:2:2(8bit/12bit) and DDR4:4:4(24bit);
so how can i to connect the ADV7611 with the GS2972 correctly to comlete the HDMI to SDI function?
best regards!
Assuming you are using discrete sync signals, you can set the ADV7611for SDR 4:2:2 24-bit mode OP_FORMAT_SEL=0x8A and not connect the lower 2 bits on each bus
