Kindly suggest an IC to interface NHD-5.0-800480TF-ATXL which has integrated touch control option with digital inputs.
ADI does not make video engines
We are looking in to your question and will provide an update soon
We'd also need to know the video source. This particular part is meant to be driven by a MCU with an RGB out and I2C for touch interfacing. Many of our chip could drive the video portion like the ADV7612 if you wanted a HDMI intput. I am not really sure of your application.
Video source will be from FPGA with 3.3V or 1.8V logic or any voltage logic supported by Artix 7. If possible it should be able to handle the touch interface also.
The Artix should be able to drive the display directly. touch interface is over an I2C bus, again the Artix should be able to do this. There is no need for another IC to interface for you unless you need to level shift the signals.
I'm looking for a controller which contain Embedded Video Engine as well as with SPI or I2C or Serial interface so that pin required at FPGA can be minimized.
Other then a processor output, ADI does not make video generator chips. I suggest going back to the manufacturer of the LCD and see what they use on their reference designs.
I'm looking for a better part for http://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT81x.pdf . Kindly let me know whether you have any similar or better part.
Retrieving data ...