AnsweredAssumed Answered

SPI Flash problems on EZKIT bf-609

Question asked by Elena_PM on Oct 10, 2017
Latest reply on Nov 20, 2017 by Jithul_Janardhanan

Hi,

I have used EZKIT bf-609 anf ICM -2000. At first I load Power_on_Self.ldr. I've build .ldr file and load it with cldp and bf609_w25q32bv_dpia.dxe from ADSP-BF609_Evaluation_Board-Rel1.1.0. And it  worked well.

 

But then I've created my own project and build ldr file with the same options (-v -proc ADSP-BF609 -si-revision 0.1 -b SPI -f hex -width 8 -bcode 0x1).

Then I've  loaded ldr file with cldp ( -proc ADSP-BF609 -emu ICE-2000 -driver  "c:\Analog Devices\ADSP-BF609_Evaluation_Board-Rel1.1.0\BF609_EZ-Board\Blackfin\Examples\Device_Programmer\serial\bf609_w25q32bv_dpia.dxe"  -cmd prog -erase affected -format hex -file Ethernet5_Core0.ldr) It is load OK.

    But DSP does not start after it and more than - when I trying second load or view memory with cldp (-proc ADSP-BF609 -emu ICE-2000 -driver "c:\Analog Devices\ADSP-BF609_Evaluation_Board-Rel1.1.0\BF609_EZ-Board\Blackfin\Examples\Device_Programmer\serial\bf609_w25q32bv_dpia.dxe" -cmd view). cldp freez.

Outcomes