I would like to use ADM1186.
So, I have some questions.
About On sequence
#1 Is it OK if VIN4 is 0.6V or more at the timing of ENABLE OUT4 active?
About Off Sequence
#2 Does the internal status and PWRGD signal operate asynchronously?
#3 If VIN1 to VIN4 are 0.6V or more, will PWRGD become active?
#4 During off sequence operation, do not control DELAY only, are they also matching with the recognition that is
performing power monitoring?
Since it can be from one, please give me an answer earlier.