I'm using script AVES3_Folder_EVAL-ADV7842-7511\ADV7842-VER.5.9c_AVEB.txt as a starting point for a simple 1080p in/out setup for debugging a proto board. There's 2 addresses that don't seem to match any addresses for sub-device maps, ie, registers 0xf1...0xfe. The addresses are 0x50 and 0x72. I just want to confirm that these don't correspond to a sub-device in the ADV7842.
From the script:
50 10 05 ; Data output mode
72 01 00 ; Set 'N' value at 6144