Please advise if my customer can use the spectral inversion of AD9788.
The customer could not confirm it by the descriptions in AD9788's datasheet as shown below.
Yes, the diagram is shown in the datasheet, but the corresponding bit is not mentioned in the register map, no detailed description on this bit in register map, I would like to recommend not to use this bit. Customer can work around by swap I/Q in the backend to implement this function as well.
In the register map, this bit is reserved. I recommend not to use this function. You can swap the I/Q in the FPGA.
Thank you for your reply.
Does it mean the description of the datasheet is wrong?
I could find the some descriptions of this function in AD9788 datasheet, except for the register map
Retrieving data ...