AnsweredAssumed Answered

ADIS16223 Rev0 Data sheet typos?

Question asked by StephanB on Sep 8, 2017
Latest reply on Sep 18, 2017 by NevadaMark

Are these typos? The Rev 0 Data sheet for ADIS16223 as downloaded from AD website has a couple of important typos.

Page 14 of 20

Alarm Indicator states "Set GLOB_CMD[4]=1 (DIN = 0xBF10)"

The DIN should be 0xBE10 not 0xBF10 ?

 

Page 15 of 20

Self-Test states "Set GLOB_CMD[2] = 1 (DIN = 0xBE02)"

The DIN should be 0xBE04 not 0xBE02 ?

 

I have drawn up a table based on Table 27 but with the addition of the DIN commands as I understand them.

Please can you check the above observations and the table below for accuracy / errors.

Are the observations above due to typos or have I misunderstood the GLOB_CMD[x] commands?

 

BitsDin commandDescription
150xBF80Reserved
140xBF40Reserved
130xBF20

Restore capture data and settings

120xBF10

from flash memory

110xBF08

to flash memory

100xBF04Set CAPT_PNTR = 0x0000
90xBF02Reserved
80xBF01Clear capture buffers
70xBE80Software reset
60xBE40Reserved
50xBE20

Flash test, compare sum of flash

40xBE10

memory with factory value

30xBE08

Restore factory register settings

20xBE04

and clear the capture buffers

10xBE02Power-down
00xBE01Autonull

Outcomes