I want to know how to modify the code to work without the 30.72 MHz. So far what I did is
1. modify the ad9528.c file as mentioned in AD9371 board - AD9528_initialize() failed
}while((reg508 & 0x27) != 0x27);
and replace it with:
}while((reg508 & 0x26) != 0x26);
2. set clockPll1Settings->bypassPll1 to 1 in myk_ad9528init.c
However, in the line
ad9528Error = AD9528_initialize(clockAD9528_device);
ad9528Error results in ADIERR_FAILED.
I think the code still seem to work fine but I want to make sure I am not breaking anything.