I am using HMC830 PLL. I am generating 60MHZ from 100MHz source frequency. Output is locked but the power level is only -22dBm. How to increase the output power level?
By default for SE output RF_N is on. Check you are measuring the power on pin 28 (RF_N) instead on RF_P.
Hi, I am measuring power on pin number 28 only. Still output power is -22dBm. What may be the other possibilities for low power output?
are you measuring the output in spectrum analyzer?? If yes,kindly keep proper settings in your SA.
are you working in single ended or differential configuration?
In HMC830, only 4 gain settings are there(9dB,6dB,3dB,0dB).
Retrieving data ...