Understood ADV7511W doesn't support deep color but could you tell the reason/usecase why support YUV 12/10-bit input?
The ADV7511W is a high speed High Definition Multimedia Interface (HDMI) transmitter that is capable of supporting an input data rate up to 165MHz (1080p @ 60Hz, UXGA @ 60Hz)
Are you looking for any particular video resolutions for this color depth?
Do you have one of our evaluation board?
Have you done the experiment with evaluation platform?
We would suggest getting an ADV7612-7511 evaluation board and run the various scripts to test your requirement.
ADV7511(100pin) supports deep color but ADV7511W(64pin, Automotive) doesn't.
HDMI is capable to carry 8bit color depth data therefore the deep color function is used to carry 10/12bit color depth data over HDMI.
Quote from ADV7511(100pin) Hardware manual
Output Formats SupportedThe ADV7511 supports the following output formats:■ 36 or 30 bit RGB 4:4:4 (Deep Color) *ADV7511 only■ 24 bit RGB 4:4:4■ 36 or 30 bit YCbCr 4:4:4 (Deep Color) *ADV7511 only■ 24 bit YCbCr 4:4:4■ 24 bit YCbCr 4:2:2
Now I'm looking at input format of the ADV7511W.
Quote from ADV7511W(64pin) Hardware manual
Supported Input Formats■ 24 bit RGB 4:4:4 (separate syncs)■ 24 bit YCbCr 4:4:4 (separate syncs)■ 24, 20, or 16 bit YCbCr 4:2:2 (embedded or separate syncs)■ 12, 10, or 8 bit YCbCr 4:2:2 (2x pixel clock with embedded or separate syncs)■ 12, 10, or 8 bit YCbCr 4:2:2 (DDR with embedded or separate syncs)
My question is what's the reason/usecase why ADV7511W(64pin) is claiming 12,10bit YUV input format support even though it doesn't support deep color.
Sorry for the delay. As per the HDMI 1.4b specification, and more particularly to sections 6.2.4, 6.5.1 and 6.5.2 as reference, deep color modes do not apply to YCbCr 4:2:2. The DEEP_COLOR_MODE[1:0] read back should therefore not be used for YCbCr 4:2:2 HDMI inputs. Believe that it would be helpful
Retrieving data ...