Good morning,

is it possible to have a BOM of ADL5545 amplifier? In particular, we have interested to implement the basic connection depicted in Figure 29 of datasheet for 100 - 500 MHz frequency band.

Many thanks.

Regards,

Antonio L.

Good morning,

is it possible to have a BOM of ADL5545 amplifier? In particular, we have interested to implement the basic connection depicted in Figure 29 of datasheet for 100 - 500 MHz frequency band.

Many thanks.

Regards,

Antonio L.

Hi,

On table 6, the values of the components are given. If part numbers are needed, then the inductor part no is given as 0603HP. Inductor is from 0603hp series with the value given on the table. CAPs are not special, any ceramic C0G or X7R cap from typical vendors like Kemet, avx, atc, murata, etc. will work.

Best,

Kagan

Hi,

On table 6, the values of the components are given. If part numbers are needed, then the inductor part no is given as 0603HP. Inductor is from 0603hp series with the value given on the table. CAPs are not special, any ceramic C0G or X7R cap from typical vendors like Kemet, avx, atc, murata, etc. will work.

Best,

Kagan