AnsweredAssumed Answered

ADV7610 Software manual doesn't seem to match the scripts.

Question asked by Byungju on Aug 21, 2017
Latest reply on Aug 21, 2017 by JeyasudhaMuthuPerumal

Hi, there.


I try to use ADV7610 in my design, and I found script from ADV7610 Design Support Files .

But, ADV7610 software manual doesn't seem to match the scripts.(EVAL_ADV7610EB1Z_scripts_V1_0 (2).zip, ADV7610-VER.1.0c)

I guess register address starting with 0x56 and 0x72 is not register of ADV7610.

Address starting with 0x56 is for Encoder, ADV7341. 0x72 is for ADV7511. Is it correct?

And, In scripts there are many registers commented like ADI recommended setting.

Can I use it as scripts says?




56 17 02;         Encoder reset      --> I think that it is register of ADV7341.

68 9B 03;         ADI recommended setting      
                        --> There are many ADI recommended setting not referring from ADV7610_SW_Manual.

                        --> Can I use it as scripts says?

72 01 00;         Set 'N' value at 4096--> I think it sets register for ADV7511.