AnsweredAssumed Answered

ADV7513 HDMI issue

Question asked by Selva_ADV on Aug 7, 2017
Latest reply on Aug 7, 2017 by GuenterL

ADV7513 video output issues.

 

what am I trying to do?

Want to convert RGB 24 bit (External DE,Vsync and Hsync) to HDMI.

I am sending a 800 x 480 video through RGB input of ADV 7513.

Below are the i2c settings.

 

                HDMI_Write(0x41,0x10); // Power Up Transmitter

                HDMI_Write(0x98,0x03);

                HDMI_Write(0x9A,0xE0);

                HDMI_Write(0x9C,0x30);

                HDMI_Write(0x9D,0x61);

                HDMI_Write(0xA2,0xA4);

                HDMI_Write(0xA3,0xA4);

                HDMI_Write(0xE0,0xD0);

                HDMI_Write(0xF9,0x00);

               

                //Setup Video Input Mode

                HDMI_Write(0x15,0xF0); //Video Format ID (24 bit RGB 4:4:4 or YCbCr 4:4:4 Separate Syncs) and I2S frequency Invalid

                HDMI_Write(0x16,0x30); //Input Color depth (8 bit)

                HDMI_Write(0x17,0x00); //Aspect ratio of input Video (Set for 4:3 but ours is 3:2)

               

                //Setup Video Output Mode

                HDMI_Write(0x18,0x46); //CSC Disable

                HDMI_Write(0xAF,0x06); //HDMI Mode Select

 

After configuring this.i tried reading video mode detection registers

 

0x3F

Auxillary VIC detected ----->101 ----->240P Active

Progressive mode information--------->case 1:240 P and 263 lines

 

0x3D

VIC to Rx---------->VIC#8 240p-60  2 X clk 4:3 

 

According to video mode detection description.

I tried setting manual and VIC manual to different setings....iam not able to see any data in HDMI.Please support for bring up.

thanks in advance.

 

 

 

 

 

 

             

Outcomes