customer is reviewing the HMC941ALP4E and HMC939ALP4E.
1. Vdd +3.3V will be applied. is it possable?
2. if +3.3V Vdd is applied, is there any change in RF performance?
3. Do you have a Min Vdd value?
HMC939ALP4E and HMC941ALP4E can be operated at Vdd=3.3V and Vss=-3.3V. Both devices will maintain same small signal parameters (insertion loss, attenuation accuracy, return losses) but degrade large signal performances (IP3, input power compression & handling) by a couple dB.
Thanks for your kinldy support.
Retrieving data ...