These are my first steps in DSP programming, so i started with a first project. I created a SPORT0 connection to communicate with an FPGA. After setting this port, i wanted to generate an interrupt (in this port) in simulation mode, but i could'nt do it, and i had this error message: "*** Port doesn't exist or isn't opened *** with PC at:".
My project manager told me that we have the same problem in every project with the ADSP21469 whereas we had never had a problem with other models ( adsp21369). So I would be happy if you could help me find a solution to this problem knowing that I'm really beggining in the DSP Programming .