i have an ADuCM3029 EZ-Kit 1.2 , i don't know why but the LCD didn't show any things.
Thank you for your question. The LCD is only used to display information when used in evaluation mode in conjunction with the ADF7030-1 Design Center. The drivers for the LCD are not included in the Radio Drivers package. The Radio Drivers will function correctly even though the LCD does not display anything.
We need some further information to understand your problem:
first thank you for the reply
those are some information:
LCD shield boards for the ADuCM3029 EZ-KIT board
i'm using J-Link Lite emulator
the IDE is IAR Embedded workbench
the code is from the internet ( adf7030-1_test )
I need some further information:
yes you are right i am refering to EVAL-ADF7030-1 EZ-kit. i have recommended this package.
for the code this is the link:
thanks for your reply. so how can i get the drivers for this LCD?
can you please add a link here.
Unfortunately we currently do not have driver code available for the LCD. The information and programming instructions for the LCD can be found @ http://www.lcd-module.com/eng/pdf/grafik/dogm128e.pdf if you wish to communicate with the LCD.
Retrieving data ...