Thank you for your inquiry. EngineerZone (ez.analog.com) offers support for English language inquiries only. If you require assistance in Chinese please visit https://ezchina.analog.com/welcome.
Zed+FMCOMMS2,Run qpskrxtx model in Matlab R2015b.The error message is in the picture.
Please give me some suggest to work this out。Thank you very much!
Wenshan - Can you describe in a little more detail what you're trying to do?
I see a block labeled AD9361 in your model - if that is the simulation model for the AD9361, then it's meant to be used in simulation only, and not connected to hardware.
If you're trying to read, or write data to and from the AD9361 on the FMComms board, then you would need to use the example models that are part of the Zynq SDR Support Package, which replace the AD9361 simulation block with the appropriate System objects that enable communication with the hardware.
Please confirm which workflow you are attempting. There are some short tutorial videos available that may help with the process as well - Video 1 - hardware setup and data streaming
Video 2 - hardware/software codesign
The videos target the ADI RF SOM (formerly PicoZed SDR) hardware, but the workflow is identical when used with the Zed+FMComms setup.
What configuration file are you using?
Can you try this simpler example and let me know if you get a similar error: MathWorks_tools/ad9361_matlab.m at master · analogdevicesinc/MathWorks_tools · GitHub (Use the config file in the same folder)
Retrieving data ...