AnsweredAssumed Answered

ADV7281m configuring it in kernel 4.9

Question asked by nsahula on Jul 20, 2017
Latest reply on Jul 24, 2017 by larsc

I need to configure adv7281m in renesas SOC which uses rcar-csi as bridge(csi receiver) and rcar- vin as dma engine.

I have done the configuration in device tree as mention in DT bindings.

When i start the streaming (continuous capture), i am getting

rcar.csi2: timeout reading the PHY clock lane

further probing the data lanes on adv7281m, i am seeing incorrect voltages in HS mode.