Our new design uses ADSP-SC584.
In 349 Balls CSP_BGA DAI0 and DAI1 pins 13-18 are not bonded off-chip.
We need to use PCGA and PCGB outputs as CLK/FS signals for DAI1 SPORTs.
For example to connect PCGA CLK to SPORT4 CLK we do the following:
Since we don't need to route PCGA CLK off the chip, I'm wondering if it is legal to use a not bonded DAI pin for this purpose, i.e. do the following:
Summarizing, is it possible to use not bonded DAI pins for internal routing purposes only?