I have downloaded the version 32 design support files for ADV7619.
1. The schematic and pcb layout are not referring to EVAL-ADV7619-7511 eval board, they are referring to another pcb design correct ?
2. In the ADV7619-VER1.9c file, the software configuration sequence refers to i2c commands :
98 xx xx referring to IO commands
44 xx xx referring to CP commands
4C xx xx referring to DPLL commands
68 xx xx referring to HDMI commands
however for example the mode :
:02-07 720p,1080i,1080p In - 24-bit YCbCr 422 Out
and referring to the software manual ADV7619_sw_manual_rev0.pdf, I could not find the commands :
72 15 01 ; Input 422 (YCrCb) with Separate Syncs, 44.1kHz fs
64 40 81 ; Disable HDCP 1.1 features
3. pls help / advise for the above items, thanks.