we have used ADV7611BSWZ,ADV7125BCPZ170 parts to convert HDMI to VGA. Our doubt is without any programming does it give VGA output as soon as i give HDMI input?If we want program on which I2C line present in ADV7611BSWZ we have to program?
Initialization is done over the SDA & SCL pins on the part with one of the scripts provided with the various evaluation boards.
The ADV7612 requires initialization. Once configured no other interactions are required unless you require HDCP which normally VGA sources don't.
How do we initialize?Using Which I2C line?
There are two SDA,SCL which one we have to use for initialization?
In the HDMI to VGA converter using ADV7611 AND ADV7125, As the example code guides to get the device information using I2C line provided. But how IC get to know that device is connected to get the EDID information and where the EDID information will be stored?
Retrieving data ...