any features or conditions which limits the working of fmcomms4. ? specifically using with zed board
Regarding GNU Radio we have the following information:
GNU Radio [Analog Devices Wiki]
You could try to reproduce our tests:
AD-FMCOMMS2-EBZ / AD-FMCOMMS4-EBZ / AD-FMCOMMS5-EBZ Specifications [Analog Devices Wiki]
You should try to use IIO oscilloscope application to get a feel about the capabilities of the board.
You can find information regarding fmcomms4 at :
AD-FMCOMMS4-EBZ User Guide [Analog Devices Wiki]
yes all information is present on link but limitations/ conditions/ parameters with which use of fmcomms4 is restricted. It's for testing i required data.
Could you be a bit more specific ?
Restricted from what point of view ? Limitations compared to what ?
In the above link, the capabilities of the board are described. Everything outside of the described capabilities can be considered a limitation.
yes to be specific, if i transmit a signal(in range 70MHz to 6GHz) using fmcomms4 with zed board in gnuradio then it will receive before and after this it can't; similarly wat more features i can test with gnuradion ,as i couldn't find any software features which can be tested on gnuradio. like i found features as follows
but can we test these on gnuradio if yes then please give me some suggestion else give suggest for some points to test on gnuradio.
sorry for bad english
Retrieving data ...