we have tried to bring up the board ZC706+AD9371, which I received from Xilinx office in Banglore.
We have ADI EVAL Board with Programed SD cards.
There are three scenarios on the Boot up issues we are seeing with this board.
- It is not at all programing INIT LED is RED when powered on and tried with lots of power recycle.
- In some power recycles it is not even programming but INIT LED Stays in Green, no response on DONE LED. Don’t know what is happening with board.
- In some power recycles two times in 100 power recycle. It gets programed and the GPIO LEDs will blink in sequence. In this condition the Ethernet port is switching between connect/disconnect and serial will come up and will hang in the middle.
We are not able to access the board in any condition we have not done any work on this board till now.
We tried with different SD cards and different power supplies(adopters from Xilinx 12V/5A) still no progress.