How to set the CP CSC conversion register for following input colorspace, when configured in automatic mode?
HDMI input colorspace is,
sYCC 601Adobe YCC601Adobe RGB
Yes your understanding is correct. We have just verified in the evaluation board, default value is updated as "1111" and based on the input color space of the generator, HDMI_COLORSPACE[3:0] register is updated accordingly.
Do you have one of our evaluation board for ADV7610?
How do you configure the board?
Are you using any specific script from ADV7610 Design Support Files?
We strongly recommend customers evaluating ADV7610, ADV7611, or ADV7612, start with one of our evaluation boards.
Our customer does not has the evaluation board for ADV7610.
We will propose to use the evaluation board.
Following the three inputs are available to readback from "HDMI_COLORSPACE[3:0], Addr 68 (HDMI), Address 0x53[3:0] (Read Only)".
sYCC 601 , Adobe YCC601 , Adobe RGB
But "INP_COLOR_SPACE[3:0], IO, Address 0x02[7:4]" is not include the above three inputs.
For example, following, CP CSC conversion is available?
HDMI input colorspace is, sYCC 601 or Adobe YCC601 or Adobe RGB
Please refer UG438 guide section color space conversion matrix section page no :92 which explains all details of CSC and registers configurations.
Please visit ADV7610 Design Support Files for UG-438 reference
Thannk you for reply.
Our customer already has checked the "UG-438".
If input color space is sYCC 601 or Adobe YCC 601 or Adobe RGB,we must set the "1111 (default) : Input color space depends on color space reported by HDMI block" to "INP_COLOR_SPACE[3:0]" .
Is it correct ?
If not, which must set the one of "0000 ~ 0111" or, one of other 1000 ~ 1110 ?
1000 : sYCC 6011001 : Adobe YCC 6011010 : Adobe RGB
???? : ? >>> How to set ? "1111" ?
Retrieving data ...