Hello!If I purchased the Evaluation Board - HMCAD1511 Eval PCB Kit, can I modify the program in the FPGA development board? After modifying the program,can I restore it back?
The HMCAD1511/1520 Eval kit ships with a pre-compiled binary FPGA configuration. Modification of the default FPGA code is possible assuming you have access to the licensed Xilinx ISE Dev Software Tools and JTAG Interface Hardware. The FPGA source code for this Eval Brd is avail here: https://ez.analog.com/message/185935?commentID=185935#comment-185935. The FPGA Source Code is provided as-is with no implied warranty or support.
Please be aware that inadvertent misconfiguration of the supplied default FPGA configuration could result in damage to the HMCAD1511/1520 and/or Xilinx SP-605 FPGA brds. The user assumes all responsibility for modifications to our default FPGA configurations.
The default FPGA configuration can typically be reloaded into the SP605 using the compiled binary included with the EasySuite Software Tools.
Moved to high-speed ADC section.
How can the default FPGA configuration be reloaded into SP605 using the compiled binary supplied with the EasySuite software tool. Is there a specific tutorial?
Sorry, it is reloaded to SP601.
To reprogram the SP601 you will need to use the EasyStack Software, User Guide, and config files linked here: https://ez.analog.com/message/273614?commentID=273614#comment-273614
easyStack_hmcad_sp601_rev118_405.mcs can be used to configure HMCAD1511 kit? Is the HMCAD1511 kit different from the PFGA program for the HMCAD1520 kit?
Yes, the HMCAD1511/1520 use a unified/common FPGA config file.
Retrieving data ...