i am new to the CCES environment. Recently i have tried to import a few VDSP assembly projects into CCES. The conversion process appeared to work out and the smaller of the 2 projects (a bootloader) would also build and appeared to work.
A much larger application (an audio matrix with equalizers, dynamics an effects) also went through the conversion process without apparent problems, but would not build afterwards with the following message:
elfloader.exe -proc ADSP-21489 -si-revision 0.2 -bspislave -fbinary -hostwidth 8 -l"C:\Analog Devices\CrossCore Embedded Studio 2.5.1\SHARC\ldr\489null.dxe" -id0exe=0: -id1exe=1: -id2exe=2: -id3exe=3: -id4exe=4: -id5exe=5: -id6exe=6: -id7exe=7: -o "..\..\Debug\R12HW_Engineer.ldr" "..\..\Debug\R12HW_Engineer.dxe"
[Error ld0068]: Too many input files.
Is there an actual limit to the amount of input files for successfull conversion? Any help would be greatly appreciated. Kindest regards,