AnsweredAssumed Answered

about AD9736 outpower

Question asked by hunger on May 15, 2017
Latest reply on May 15, 2017 by danf

Dear Sir/Madam,

With regard to the problem of high-speed DACs AD9736, we tied pin B14 to analog ground via 10Ω resistor .we found that the DAC's output power is about 20db higher than before(which we used 10kΩ resistor).
That change makes the output power to meet our demand.But we found datasheet recommended us to tie pin B14 to analog ground via 10 kΩ resistor.
So,is any problem to connect pin B14 to ground with 10Ω resistor(which is much less than recommed value)?

Could you please help clarify above.
Thanks.

Outcomes