AnsweredAssumed Answered

AD9434-FMC-500EBZ Demo Project For New ML605 Board

Question asked by Seagate on Apr 12, 2017
Latest reply on Apr 21, 2017 by rejeesh

Hi Dear Analog Devices,

 

We bought AD9434-FMC-500EBZ and ML605 boards, we could not run the source code successfully under our ML605 board at the initial time according to manual.

- https://wiki.analog.com/resources/fpga/xilinx/fmc/ad9434

 

It seems that ML605 shipped with new DDRAM after 2013, but the demo projects from ADI were not updated.

AR# 44814: ML605 - SO DIMM shipped with newer version 

- cf_ad9434_ml605_edk_14_4_2013_03_29.tar.gz, not updated on updated ML605 board with new DDRAM;

- cf_ad9434_ml605_sw_14_4_2013_03_29.tar.gz, not updated on updated ML605 board with new DDRAM;

 

Then we failed to run demo project because of "ELF verify failed", which was caused by DDRAM controller mismatch.

We could solve this issue by the method providing in AR 44814.

But it seems, this will cause some unstable issues, for example, after running projects for 6 times, I could not download bit file and elf file. I need to restart board and all software again.

 

So, did you guys update the demo projects for new ML605 board?

- cf_ad9434_ml605_edk_14_4_2013_03_29.tar.gz

- cf_ad9434_ml605_sw_14_4_2013_03_29.tar.gz

 

Thanks

Outcomes