I want to know test condition of Frequency Response.
Could you tell me the test condition (ex)PCB bord size? )
We are not able to provide a test procedure for this test in this forum. Getting an accurate response out to 20 or 30 kHz requires quite a bit of attention to detail in the attachment process. Quite often, you actually have to glue the actual sensor to a mounting plate, which connects directly to the shake her head and use flexible circuit interface techniques to communicate with the device during the test. I hope that helps.
Thank you for a reply.
But ADXL001 is only example.
I want to know test condition of Sensor Resonant Frequency.
Warranty condition of the value（Sensor Resonant Frequency） of the data sheet
I think that valu is change by test pcb bord size
Would it be possible to offer a quick screen shot of what you are referencing in the ADXL362 datasheet? We have lost some staff members and are in the process of re-organizing. I am trying to help them out, but I am not familiar with the ADXL362 datasheet and I really don't have time to dig for such a minute detail. Can you help me out? Perhaps with that reference, I will have a better idea of who might be able to help. I suspect that the consideration will be much different for the ADXL001, because the end application intent is drastically different. Having said that, I will give this a shot, once I have clarity on the request. Thank you!
Retrieving data ...