I would like to make clear how to set MONO on Power Ctrl Register.
On Datasheet, Page 32 and 41 are different MONO bit description as below red under line.
Thank you for your help as always.
For the SSM3582 mono mode there is typo in the register map. The register 0x04 MONO bit description is reversed.
The correct description should be,
0 : Stereo mode enabled ( default)
1: Mono mode enabled.
On powerup by default the part comes up in Stereo mode. I will initiate the datasheet update. Thanks for pointing out.
Is there anything update?
Thank you for your response!
I appreciate if fix that typo on next revision.
Retrieving data ...