I want to output DVI with ADV7511W.
So I am trying to do this at the EVAL board.
At the Programming guide, to chose DVI, 0xAF = 1'b0 must be chosen.
Is this the only different thing between HDMI and DVI?
I tried to output DVI with EVAL-ADV7612-7511.
I am using Astro VA-876 for the image source.
The monitor is Astro VA-1831l.
And the image data is VESA 1280*960 60Hz.
After I run the script "6_1f_Port_A_1080p_YPrPb_444_in_RGB_444_out_Through_HDMI_Fast_Switching_VIC_16_31_32.py"
which I attached , I changed 0xAF.
But sometime when I set 0xAF=1'b0 the color looks strange.
Why this happens?
Is there anything else to set the registor?
↓0xAF = 1'b1 HDMI mode
↓0xAF=1'b0 NG DVI mode
↓0xAF=1'b0 OK DVI mode