I'm trying to get the Captouch_5ButtonsTest application working, but only the up, down and enter buttons are generating events. Is there any change I should be making in hardware for this to work?
On the Eval-ADUCM350EBZ (rev.B) motherboard, P0.2 and P0.4 are connected to push-button switches, with capacitors for debounce. This will prevent the Left and Right CapTouch button presses and releases from being detected. To allow these to be detected, remove 0r resistors R63 and R65 from the Eval-ADUCM350EBZ.
Thanks, I had actually read this in the REAMDE.txt but completely forgot about it!
Retrieving data ...