I am working with the ADV7623
Currently using same EDID setup as evaluation board.
For register setup i am using:
:1-3 Port A Audio Pass Through Mode for 192KHz multi-channel PCM:
and :6-1 EDID Download HDMI: (but with same EDID settings as evaluation board.
I have a few problems:
Some sources dont get through, such as the blu-ray player we have here.
Image quality on our Epson EB-G5450WU is very poor. Looks like noise but also happens with very short cables.
(see attached images).
Currently I am not 100% sure if this is a software problem or if it could be a hardware problems.
I lean towards software realted.
Any ideas how i might move forward?