I found ADV7181D consists of two parts on the data sheet. Part one is SD processor (SDP), handling all types of PAL, NTSC and SECAM signals. Part two are component processor (CP), and RGB component YPrPb format, including RGB graphics. But when I downloaded "ADV7181D_Manual_Rev0.pdf" I found there was no RGB component video signals in the configuration information, and the "ADV7181D_ADV7181D@_ADV7341-VER.1.0c.txt in "ADV7181D_Evaluation_Software" does not refer to RGB component video signals configuration, only having YPbPr component video signal configuration.
And thus I would like to ask is there a RGB component video signal configuration document or routines.