如果想让7513将没有加密的视频源通过hdcp加密后发给显示器应该如何配置ADV7513，我根据programming-guide来把0xaf置为1，但是bksv ready interrupt却没有出现，现在请问我是否有些地方漏了配置，谁可以指点我一下吗，有例程就更好了。
As the content is not in English, not able to extract the information what you added exactly. Could you please send the details again in English?
Hello,The details in English:
I 'm trying to design an adv7513 hdcp transmiiter which encrypt the video signal and then send to the displayer.
For exmaple,when a video signal transmiiter send the unencrypted video signal to 7513 and ADV7513 output signal at HDCP enable setting.How can I configure the registers of 7513?
I have try to set 0xaf=1, and set 0xaf=1,but it's not work,the bksv ready interrupt flag 0x97 always =0.
Thanks a lot!
Could you please follow the instructions as stated in this thread ADV7511 HDCP Settings?
Retrieving data ...