We have determined that the assignment of the test pins C11 and P3 in document UG-214
and in the data sheet is different. In UG-214, C11 should be connected to 3.3V via 4k7, in the data sheet to GND. P3 is to float according to UG-214, according to data sheet on GND lie. What is right, or what is the last stand? In the circuit diagram of the Evalboard (Hardware Config Update for Rev 1p0_1p1.pdf),
a PD is indicated at C11, the pin is called PWRDN2 #. P3 is floating?