Hi Sir ,
I had tried to use AD9683's EVB and face to below problem , could you please give me advice to solve it?
Xilinx platform:ZC706 (ISE 14.4)
High speed ADC to FMC adapter : CVT-ADC-FMC-INTPZPCBZ(REB B)
Follow the wiki first -- they are listed in there.
Where did you get this design? This is not something we support anymore. You need to switch to either Linux or No-OS code.
I refer to below link.
So could you please help me solve this problem.
AD9683 Evaluation Board, ADC-FMC Interposer & Xilinx ZC706 Reference Design [Analog Devices Wiki]
This is going to take some time, but let's see. Obviously your SPI reads have failed. So did you do the board level changes? If you already did and still getting errors, you may have to probe that interface. You could also try changing the phase/polarity of the clock signals and see if it makes a difference.
What is the board level changes?
The Bit file was downloaded from ADI's website.
I don't know what step is wrong?
Could you please do it again and observe it can work or not ?
Retrieving data ...