AnsweredAssumed Answered

Is it possible to configure an ADV7403 to digitise a 10MHz CCIR video signal?  The nominal bandwidth for the PAL spec is shown to be around 6MHz, but my system is a high resolution black and white CCIR system that can produce 800TVLine bandwidth signals.

Question asked by johnuk on Feb 14, 2017
Latest reply on Feb 27, 2017 by DerekBurke

I would like to digitise the CCIR signal (625i) using the COMP processor. The PLL would need to be set to 40MHz, which I believe I can achieve by programming the PLL registers etc.

Is there a way of reducing the signal filtering through the signal path that will permit processing a 10MHz signal bandwidth video signal?