Hi, I'm beginner using ADV7511.
I have a question.
According to datasheet, EDID is done by the following order.
HPD interrupt active --> Power Up --> Wait for EDID Ready Interrupt --> Read EDID data from I2C Address.
And 0x43 means the address of EDID Memory.
This is my problem.
When I do I2c Configuration, the value of 0x43 is firstly 0x7E.
But when I read the value continuously, its value changes to 0x14 from 0x7E.
Could the value of 0x43 changed automatically?