I am trying to boot zynq ZC 706 evaluation board along with ad9371 evaluation board.I am SD card boot option. Please somebody help me with step by step procedure of booting zynq ZC706 evaluation procedure.
Please refer section 'AD9371 DEMONSTRATION SYSTEM OVERVIEW' in UG992.
Also refer troubleshooting guide at below link for any issue you face while using TES.
I have zynq ZC 706 evaluation board and ad9371 evaluation board with me. I am referening to AD9371 demonstration system overview in UG992 as mr. gverma suggested me. Board is booting fine.. I am collecting via uart port in serial com terminal... Everything is working fine.. But when I was going through following link.. I came to know that I can across /sysfs interface. /sys/bus/iio/devices/iio:deviceX in above link has many files. But /sys/bus/iio/devices/iio:device0 in my board has very few files. Please refer to image of my sysfs. please tell me i have missed something..
We have two implementation of AD9371 api driver. One which comes with user space driver using SPIDEV interface used by AD9371 TES on standard SD card shipped along with AD9371. There is another implementation as a Linux kernel driver which using IIO frame work. You are in user space driver implementation and it does not use IIO framework.
If you use Linux driver API implementation, you should be able to see the sysfs IIO entries.
Retrieving data ...