Q1. I'm trying to control INPT by placing resistor between INPT and GND.
Desired current input at INPT is 0.1uA ~ 20uA with supplying VINPT to 0V~2V.
If you look at the Eval board schematic in the datasheet, I'm trying to control IOUT by changing INPT voltage input.
Can I have 10uA current on INPT If I place resistor between INPT and GND?
(e.g 100K ohm with 1V at IPD port)
Q2. If anyone can review my schematic, let me know e-mail address.