Hi, here is my schematic, i wonder why the Vp-p of HMC960&HMC1023 can only reach 300mV rather than 2V?
Moving to RF and Microwave subspace
thx, the input signal is 100mV, gain each is 20dB, the differential load is 400Ω each~
The register data:
and there's another question, as mentioned in reg02h, what does the gain deglitcher use for?
hmc1023 is followed with hmc960 in cascade.
the reg data is for hmc960.
The signal is 5M, 20M, 40M.
The filter corner is also set 5M, 20M, 40M respectively.
Retrieving data ...