AnsweredAssumed Answered

How to add ADIS16488 module using Raspbian on Raspberrypi 2

Question asked by joesmith on Dec 30, 2016
Latest reply on Jan 11, 2017 by joesmith

Dear all,

I tried following steps but iio folder was not created in /sys/bus/

 

1) cd /lib/modules/$(uname -r)/build/ 

2) sudo make menuconfig 
==========================================================
Linux Kernel Configuration
     Device Drivers  --->
          <*>     Industrial I/O support --->
               --- Industrial I/O support
               [*]   Enable buffer support within IIO
               -*-     Industrial I/O buffering based on kfifo
               -*-   Enable triggered sampling support
               [--snip--]
               Inertial measurement units  --->
                    [--snip--]
                    <*> Analog Devices ADIS16480 and similar IMU driver
                    [--snip--]
==========================================================
3) sudo make -j 4

4) sudo make modules_install

5) sudo make install

- The result of: uname -a

Linux raspberrypi 4.1.7-v7+ #817 SMP PREEMPT Sat Sep 19 15:32:00 BST 2015 armv7l GNU/Linux


- The result of: cat /lib/modules/$(uname -r)/modules.builtin | grep adis

kernel/drivers/iio/imu/adis16480.ko
kernel/drivers/iio/imu/adis_lib.ko

Thanks in advence

Outcomes