Does any of the three HDMI transmitters (ADV7511/7513/7524) support YCbCr 4:2:2 16-bit mode, i.e. ADV7511 input id 1, with double data rate clock although it is not explicitly listed in the mode overview?
Did you refer table 4 Input ID selection from ADV7511 hardware user guide. For input ID=1 maximum input clock is 165 MHz, but for DDR it is 82.5 MHz. Table reference following will give more details
thanks for the reply but from what I can see Table 4 of the HW user guide refers ID 3 and 4 are marked with "2x clock" but expect Y and C to be send sequentially. This will be sufficient for 720p60 but not 1080p60.
What I am looking for is ID=1 or ID=2 type of input assignment (Y and C in parallel) with data being clocked at both clock edges, i.e. "2x clock" mode.
The only input modes available are those listed in Table 4 and it's associated tables.
Retrieving data ...