For the AD8065 model of amplifiers, what is the tolerance on the supply voltage for a +/-5V application? Is the tolerance roughly 10%, meaning that the amplifier will continue to operate at 4.5V?
The part needs at least 5V across it, so with +/-5V, that's 10V. If you went to +/-4.5V, that is still 9V.
The output swing will be less, the PSRR says that Vos will change, etc., but the part does not
fall off a cliff. If there are one or two specs that are critical to your design, perhaps we could
Retrieving data ...